Manual

19
It is the responsibility of the purchaser to be absolutely certain that any parts ordered from BERSA are of
the correct type and are properly fitted and installed by a competent person. THE IMPROPER
FITTING OF PARTS OR IMPROPER MECHANICAL ADJUSTMENT MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND POSSIBLE SEVERE INJURY TO THE SHOOTER
OR TO OTHERS. Therefore, the purchaser and/or installer of parts must accept full responsibility for the
correct adjustment and function of the firearm after such installation has been made or attempted.
Service policy:
Your firearm has been carefully inspected and tested before being shipped to ensure it meets our
specifications and standards. If your firearm needs adjustments, refinishing or repairs, we highly
recommend that you obtain factory service from BERSA.
If you have any questions about your firearms performance, write to our Service Department and
accurately describe the situation. If the Service Department feels your firearm may need factory service,
they will let you know and give you all the instructions for shipping the firearm adequately.
BERSAs distributor will inspect your firearm thoroughly and evaluate the problem or problems you
mentioned in your letter. If the repairs needed are not covered by the warranty (copy enclosed), we will
send you a quotation of the actual cost of the repairs, not an estimate. You must authorize all repairs. No
repairs will be made without your express approval.