Manual

12
When the last round has been fired, the slide remains fully back. If you intend to fire again, remove the
empty magazine and insert a loaded one. Press the slide catch (Fig. 4) to close the slide and load the
chamber.
CAUTION: Always keep your finger off the trigger whenever you do not intend to fire.
Safety Key:
Your pistol is provided with an internal locking system operated by a special key. It is located above the
trigger in the left side of the frame. In the unlocked position (F) the pistol is ready to fire. In the locked
position (S) you can not cock the hammer, fire in double action, load a catridge in the chamber
or disassemble the pistol. Please make sure that your pistol is in the lock position (S) when not in use.
Always store and keep your pistol unloated and in a safe place away from minors. Replacement keys
can be ordered by calling customer service at 1-732-493-0333.
Unloading the pistol and chambered cartridge:
Press the magazine release button and then grasp the serrated sides of the slide from the rear and
draw the slide fully rearward in order to extract any cartridge from the barrel chamber.
When sure the chamber is empty and the cartridge has been ejected, release the slide.
How to reverse the magazine release button: After removing the magazine, unscrew and remove the