Instruction Handbook

CAUTION: Always keep your nger out of the trigger

whenever you do not intend to re.

SAFETY KEY

Your pistol is provided with an internal locking system

operated by a special key. It is located above the

trigger in the right side of the slide. In the unlocked

position F (Fig. 2) the pistol is ready to re. In the

locked position S (Fig. 1) you can not re, load a

cartdrige in the chamber, or disassemble the pistol.

Please make sure that your pistol is in the lock position

(S) when not in use. To switch the internal locking

system to the lock position (S), be sure the trigger is

set in the forward position. To set the trigger to it’s

forward position, remove the magazine, grasp the

gun rmly with one hand, with the thumb and fore-

nger of your other hand, and pull back until the

end of the travel; then release the slide from rear-

wards, without following it’s forward movement, al-

lowing the barrel and slide to engage normally.

Always store and keep your pistol unloaded and in a

safe place away from minors.

Replacement keys can be ordered by calling cus-

tomer service at 1-732-493-0333 or at www.bersa.com

Fig. 1 – internal locking system in locked position

Fig. 1 – internal locking system in ﬁre position