SDS

ManualsBrandsBernzomatic ManualsSolderSterling 8 oz. Premium Lead Free Solder

SAFETY DATA SHEET

1. Identification

Sterling Lead-Free Solid Wire SolderProduct identifier

Other means of identification

WC003

SDS number

Solder.

Recommended use

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Manufacturer/Supplier

Worthington Cylinder Corporation

Address

200 Old Wilson Bridge Road

Columbus, OH 43085

United States

Email:

cylinders@worthingtonindustries.com

Telephone Number:

866-928-2657

CHEMTREC - 24 HOURS:

Within US and Canada

800-424-9300

Outside US and Canada

+1 703-741-5970 (collect calls accepted)

2. Hazard(s) identification

Not classified.

Physical hazards

Not classified.

Health hazards

Not classified.

OSHA defined hazards

Label elements

None.

Hazard symbol

Signal word

None.

Hazard statement

None.

Precautionary statement

Prevention

Observe good industrial hygiene practices.

Response

Wash thoroughly after handling.

Storage

Store away from incompatible materials.

Disposal

Dispose of waste and residues in accordance with local authority requirements.

Hazard(s) not otherwise

classified (HNOC)

Molten material will produce thermal burns.

3. Composition/information on ingredients

Mixtures

7440-31-5 > 90Tin

CAS number %Chemical name

7440-50-8 4 - 5Copper

7782-49-2 < 1Selenium

All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in

percent by volume.

Composition comments

Sterling Lead-Free Solid Wire Solder SDS US

907995 Version #: 01 Revision date: - Issue date: 28-May-2015

1 / 7

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier Sterling Lead-Free Solid Wire Solder Other means of identification SDS number WC003 Recommended use Solder. Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Manufacturer/Supplier Address Email: Telephone Number: CHEMTREC - 24 HOURS: Within US and Canada Outside US and Canada Worthington Cylinder Corporation 200 Old Wilson Bridge Road Columbus, OH 43085 United States cylinders@worthingtonindustries.
PAGE 2
4. First-aid measures Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Immediately remove from further exposure. Get immediate medical assistance. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. Give supplemental oxygen, if available. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.
PAGE 3
8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Components Type Value Form Copper (CAS 7440-50-8) PEL Dust and mist. Fume. Selenium (CAS 7782-49-2) Tin (CAS 7440-31-5) PEL PEL 1 mg/m3 0.1 mg/m3 0.2 mg/m3 2 mg/m3 Components Type Value Form Copper (CAS 7440-50-8) TWA 1 mg/m3 0.2 mg/m3 Dust and mist. Fume. Components Type Value Selenium (CAS 7782-49-2) Tin (CAS 7440-31-5) TWA TWA 0.
PAGE 4
Initial boiling point and boiling range Not available. Flash point Not available. Evaporation rate Not available. Flammability (solid, gas) Not available. Upper/lower flammability or explosive limits Not available. Flammability limit - lower (%) Flammability limit - upper (%) Not available. Explosive limit - lower (%) Not available. Explosive limit - upper (%) Not available. Vapor pressure Not available. Vapor density Not available. Relative density 7.
PAGE 5
Acute toxicity High concentrations of freshly formed fumes/dusts of metal oxides can produce symptoms of metal fume fever. When heated, the vapors/fumes given off may cause respiratory tract irritation. Overexposure of Tin can cause irritation of the eyes, skin, mucous membranes, and respiratory system.
PAGE 6
IMDG Not regulated as dangerous goods. Not applicable. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information US federal regulations Under some use conditions, this material may be considered to be hazardous in accordance with OSHA 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List. TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed.
PAGE 7
International Inventories Country(s) or region Australia Inventory name Australian Inventory of Chemical Substances (AICS) On inventory (yes/no)* Yes Canada Domestic Substances List (DSL) Canada Non-Domestic Substances List (NDSL) China Inventory of Existing Chemical Substances in China (IECSC) Yes Europe European Inventory of Existing Commercial Chemical Substances (EINECS) Yes Europe European List of Notified Chemical Substances (ELINCS) Japan Inventory of Existing and New Chemical Substan