Item Brochure

8 9
RS40 and RS41*
Surveying Markers
Smart Targets RS30/RS31 with
reflective targets 30 x 30 mm
Smart Targets RS40/RS41
with crosshairs
Combination markers for surveyors and foremen:
RS30r in industrial construction: Documentation
of heights and axis in one product.
RS30r in industrial construction: A perfect
measuring point for each measuring instrument.
RS30 and RS31*
60 mm 60 mm
90 mm 90 mm
Attachment depth
23 mm
*self-adhesive
The Markers for Surveyors and Foremen
The combination markers RS30 & RS40 enable documentation and permanent position of
heights and axis with a single product. If different measuring devices are used at a construc-
tion site, the combination markers are the best solution to avoid measuring differences.
The height, axis and position number are indicated with embossed number punch or water-
resistant pencil. Levels, laser, theodolites, or total station—the combined markers are the
perfect surveying point for any instrument!
On difficult ground, the markers are permanently fastened with adhesive, or with dowels and
screws. Measuring rods can be set on provided ledge to guarantee precise transfer of height.
Crosshairs are imprinted on the backing plate under each reflective target to ensure the
survey point is durably marked. If the reflective target is damaged at any point, it can easily
be replaced, and the original survey point can be restored quickly and cost-effectively.