Item Brochure

28 29
4/4 Boundary Markers RSKM10 to RSKM40
Measuring Point RSFP1
The Boundary Markers can be used as offset markers on firm surfaces.
Precise documentation is ensured along inner corners, along walls, and at outer
corners. The Boundary Markers are attached using mounting adhesive.
The following designs are available:
RSKM10: 4/4 Boundary Markers without inscription
RSKM40: 4/4 Boundary Markers with “Survey Mark” inscription
The aluminum plate RSFP1 has a 5/8” stainless steel thread
for screwing in a prism or measuring instrument. If the plate
is used as a fixed point on floors, the surveyor can position
the instrument precisely above the cross.
RSFP1 is supplied with a plastic or aluminium protective cap
for the 5/8” thread.
When used as a fixed point on the floor, this point should be surveyed with a prism so that if necessary, e.g. suspected
moving of the fixed point due to foul play, it can be checked quickly and easily.
80 mm
10 mm
RSKM10-40
100 mm
8 mm
100 mm
RSFP1