Item Brochure

20 21
Twistable Reflective Target RS183
Twistable, Extensible, Plastic Housing System
When using total stations, the reflective marker can always be aligned precisely with the
measuring instrument. The reflective target can be turned in a radius of 180º, making it possible
to use the same survey point from different directions.
If the markers are pre-installed in construction zones, the surveyors can use the same surveying
point at all times during construction. Depending on the construction phase, the markers are
adjusted to the construction site process by realigning the reflective marker as needed.
With the integrated plug-in system, several markers can be combined. The markers can be
connected to each other in both directions which enables measurement from different direc-
tions without having to turn the reflective targets. The distance between the measuring points of
“stacked” markers is always 60 mm.
Adhesives permit quick and simple installation even on difficult surfaces. Provided holes
permit attachment with dowels and screws.
Offset: 0
Height of tilting axis: 30 mm
RS183 with reflective targets 30 x 30 mm
50 mm
58 mm
60 mm
Plug-in
device
at two
sides
25 x15 mm
Simple and quick installation on any surface. The reflective marker can be perfectly aligned with the
measuring instrument at all times.