Item Brochure

18 19

Adapters RSAM80 and RSAMG80

Stainless steel V4A

This stainless steel adapter with DW15 thread has been developed specifically for simple

and permanent installation during new bridge construction. It is screwed into pre-installed

anchor sleeves, with adhesive, and aligned with the reference point.

For concrete bridges, anchor sleeves are often installed on the cantilever arm and in the

cap, at distances of approximately 3 feet. They are outstanding markers for bridge construc-

tion. New holes in reinforced concrete are not necessary, and they minimize traffic disruption

by enabling remote measurement of monitored points.

To monitor metal bridges and other metal structures, avalanche barriers, and earth and rock

movement, RSAM80 adapters without threads, for welding or dowelling, can be used.

The clip system that attaches the target to the stainless steel plate, allows the original meas-

urement point to be restored quickly and cost-effectively in the event of damage.

Bridge monitoring (Tappan Zee Bridge USA)

Power plant facility

Measuring point at the ski lift support Coentunnel Amsterdam

Adapter RSAMG80 with thread and

reflective targets 40 x 40 mm

Adapter RSAM80 with

reflective targets 40 x 40 mm

50 mm

125 mm

40x40 mm

with thread