Datum Markers and Smart Targets by Rothbucher Systems Superior markers and targets that take full advantage of modern survey instrument capacities.
Content Since 1997, Rothbucher Systems has been developing and selling products that enable better location and measurement of key points in monitoring networks, survey projects, and construction sites. They are designed to improve the precision and accuracy of total station measurement, to conveniently mark control points and monitored points permanently and clearly, to make construction sites safer, and to increase surveyor confidence in reference networks.
Datum and Axis Markers RS10 and RS11* Ideal for concrete construction sites without plastering work and for permanent securing of axis as a negative imprint in concrete. RS10 or RS11* are used to securely mark reference points at construction sites without plastering work and in door and window jambs. To permanently secure the axis until the building is completed, the markers are measured and fastened in the ceiling formwork, or the slab edge formwork at the axis.
Datum and Axis Markers RS20 and RS21* The markers RS20 or RS21* are installed on an unplastered or unrendered wall to provide a level datum or finish floor level to all tradesmen. To avoid measurement differences when transferring, the markers have a ledge to which a ruler can be applied, and a nail hole for horizontal consistency. For plastering construction sites and to secure finished floor level (FFL) and axis.
Surveying Markers RS30 and RS31* RS30r in industrial construction: Documentation of heights and axis in one product. RS40 and RS41* RS30r in industrial construction: A perfect measuring point for each measuring instrument. Combination markers for surveyors and foremen: The Markers for Surveyors and Foremen The combination markers RS30 & RS40 enable documentation and permanent position of heights and axis with a single product.
Smart Targets RS50+RS51* RS60+RS61* RS70+RS71* These markers can be used in a variety of situations. Inside buildings, heights and axis are clearly documented. Laser levels or plumb bobs can be used to extend control between levels in stairwells or other openings. Outdoors, they can be fastened permanently at any point and used for positioning with total stations or other instruments. If the markers are fastened to facades, surveyors and foremen can continue to use them during construction.
Smart Targets RSAKZ6 and RSALU22 High-Precision Across Longer Distance Arabtec Resident Tower Dubai To monitor bridges, dams, roads and other objects where distance is an issue: The RSAKZ6 and RSALU22 smart targets are used where measurements must be performed across longer distances. The RSAKZ6 markers feature 60 x 60 mm reflective targets, permitting accurate reflectorlessmode measurement up to 250 meters.
Smart Angle Targets RS80, RS90 and RS100 EUR.-PAT.-NO. 1 310 765 Solutions for Difficult Positions Transportation Hub at World Trade Center in New York City These markers are used when difficult setups make it impossible to sight typical reference points. The RS80 markers with two outside reflective targets, are installed in “roof-shape” or “angular” mode. To observe facades and other points, these markers are well suited as corner solutions.
Angled Plastic Adapters RSAK80 and RSAK130 RSAK80 and RSAK130 are used on rails, bridges, housings, dams, buildings, supports, highbay shelves, glass and natural stone façades, etc. At a well-planned installation, adapters that are equipped with pre-installed smart angle targets permit access to reference point from almost any position. On railway tracks, for example, the surveyor no longer needs to put himself in danger, but can perform his measurements from a safe position at any time.
Power plant facility Adapters RSAM80 and RSAMG80 Stainless steel V4A This stainless steel adapter with DW15 thread has been developed specifically for simple and permanent installation during new bridge construction. It is screwed into pre-installed anchor sleeves, with adhesive, and aligned with the reference point. For concrete bridges, anchor sleeves are often installed on the cantilever arm and in the cap, at distances of approximately 3 feet. They are outstanding markers for bridge construction.
Twistable Reflective Target RS183 Twistable, Extensible, Plastic Housing System When using total stations, the reflective marker can always be aligned precisely with the measuring instrument. The reflective target can be turned in a radius of 180º, making it possible to use the same survey point from different directions. If the markers are pre-installed in construction zones, the surveyors can use the same surveying point at all times during construction.
Stake-out Aids RS95 and RS96 Stake-out aids RS95 and RS96 were developed specifically for stake-out work on batter boards and floor slabs. Exact measurement of floor slab reference points often presents major challenges, particularly in “final phase” with the last 5-10 cm. The work can be very time-consuming due to the continual side-to-side, backwards and forwards, movement of the prism pole which must remain plumb.
Mini-prism RSMP15 Angled Plastic Adapter with 12.7 mm Prism RSMP15 with 12.7 mm mini-prism sticks quickly and easily to difficult surfaces, such as glass or marble, historic buildings, steel girders, rails, gas and oil pipelines, or can be fastened with dowels and screws.
Twistable Mini-prism RSMP180 and RSMP280 Twistable, Extensible, Plastic Housing System With 12.7 and 17.5 mm Prisms When using the mini-prism RSMP180 or RSMP280, the prism can always be aligned precisely with the measuring instrument. The prisms can be turned in a radius of 180º, so the same survey point from different directions. Bridges and other structures can be monitored more quickly and precisely. With the integrated plug-in system, several prisms can be combined as needed.
4/4 Boundary Markers RSKM10 to RSKM40 The Boundary Markers can be used as offset markers on firm surfaces. Precise documentation is ensured along inner corners, along walls, and at outer corners. The Boundary Markers are attached using mounting adhesive.
Laser Scanner Target Markers RSL300 Fixing Adhesive UV-6800 → → → → Powerful fixing adhesive with immediate initial adhesion Clear & odorless Suitable for all products by Rothbucher Systems.
Datum Markers and Smart Targets by Rothbucher Systems guarantee clear, permanent and unambiguous measuring points. Request our price list! Georg Rothbucher Lattenbergstrasse 12 D-83457 Bayer. Gmain Phone +49 (0) 8651 2749 Fax +49 (0) 8651 3090 Mobile +49 (0) 171 7314961 www.smart-targets.com info@smart-targets.
