Item Brochure

CALL 1.800.356.7388 • FIND www.berntsen.com • EMAIL [e-mail]
33
Standard Center Designs
Use the layout below for MORASSE plastic caps. Be
sure to indicate your style and color choice and send
this layout with the order form.
G41 & G41F = 1 3/4” diameter cap for 3/8” rebar
G42 & G42F = 1 3/4” diameter cap for 1/2” rebar
G43 & G43F = 1 3/4” diameter cap for 5/8” rebar
P41 & P41F = 2 3/8” diameter cap for 3/8” rebar
P42 & P42F = 2 3/8” diameter cap for 1/2” rebar
P43 & P43F = 2 3/8” diameter cap for 5/8” rebar
M41 & M41F = 2 3/4” diameter cap for 3/8” rebar
M42 & M42F = 2 3/4” diameter cap for 1/2” rebar
M43 & M43F = 2 3/4” diameter cap for 3/8” rebar
M44 & M44F = 2 3/4” diameter cap for 3/4” rebar or 1/2” pipe
C41 & C41F = 2 3/4” square cap for 3/8” rebar
C42 & C42F = 2 3/4” square cap for 1/2” rebar
C43 & C43F = 2 3/4” square cap for 3/8” rebar
C44 & C44F = 2 3/4” square cap for 3/4” rebar or 1/2” pipe
All cap numbers ending with “F” have a capped center.
Those caps without this designation have a center hole
with ribs.
No Center Design Needed
“C” Style (Square)
“G” Style
“G” Style
“M” Style
“M” Style
or
“P” Style
“P” Style
Color Choices
Bright Orange
Red/Orange
Blue
Yellow
Green
Pink
3 lines are available on the upper and bottom part of cap
(total 6 lines). On each line: 20 letters of 1/8” or 16 letters of 1/4”
• Available with your name and number at no extra cost
• Easy to read RAISED letters
• Large diameter cap surface has enough room for stamping
additional data in the field with standard steel stamp sets
• Permanently colored…available in bright orange, red/
orange, yellow, blue, green, and now pink
• Easy to tap in…difficult to remove
• Unique open center allows bar to “mushroom” over cap
during driving…helps prevent removal of cap
MORASSE
®
PLASTIC SURVEY CAPS LAYOUT