Item Brochure

32
Standard Center Designs
PERMAMARK Color Choices
Yellow Red Orange Pink
Enclose this handy drawing with your order for
Berntsen Survey Caps or Survey Monuments,
or PERMAMARK caps.
It’s easy to design your own survey cap!
1. Select a center design (if any desired)
or your personalized Berntsen Survey
Cap or Survey Monument. Draw that
design on the layout for the size cap
you are ordering.
2. Fill in blank spaces with the lettering
you want on your cap. All letters,
numbers, and characters, including
periods, take up one full space.
Lettering may face “in” or “out” but
is usually placed so that one may read the
cap from one position.
3. Use the drawing at the bottom of the page
for PERMAMARK plastic caps. Standard center
designs are not available for PERMAMARK caps.
Lettering on PERMAMARK is “straight-across” only.
PERMAMARK
for 3/4” Rebar
Standard Layout for PERMAMARK
Lettering is straight across only. All come with center “hole”.
PERMAMARK 1/2” ID Pipe
or 3/8” Rebar Cap
PERMAMARK 3/4” ID Pipe
or 1/2” Rebar Cap
PERMAMARK 1” ID Pipe
or 5/8” Rebar Cap
3 1/4”, 3 1/2” & 4”
2”
2 1/2”
1 1/2”
No Center Design Needed
BP1P & BP2 Layout
Note: Drawings are not to scale.
2” Standard Layout
LAYOUTS FOR PERSONALIZED SURVEY MONUMENTS
FITS INSIDE
PIPE
OR OVER
REBAR