Item Brochure

CEMETERY
MARKERS
AND FIELD BAGS
™
18
Specialty Markers & Control Points
CEMETERY REBAR CAP — SPECIAL IMPRINT SUITABLE FOR CEMETERIES
This special edition cap comes with an imprint suitable for use in cemeteries.
Like all our other rebar caps, the cemetery markers are easy to set, won’t
corrode, and are made of tough aluminum alloy.
Description 25-99 100-249 250-499 500+
2” Cap w/Cross for 3/8”,1/2” or 5/8” rebar 4.75 2.90 2.49 2.39
2” Cap w/1 Row of Lettering for 3/8”, 1/2” or 5/8” Rebar 4.75 2.90 2.49 2.39
3 1/4” Cap w/”Block Lot” for 1/2” Rebar 5.85 5.15 4.09 3.99
3 1/4” Cap w/”Block Lot” for 5/8” Rebar 5.85 5.15 4.09 3.99
See the monument cap layout on page 32
BENCH TIE — OUR EASIEST-TO-USE BENCHMARK
Invented by a surveyor for surveyors, the Bench Tie is easy to set, easy to mark
permanently, and easy to use once set, with a recessed dimple on top designed to
accept a prism pole tip. A good way to set a long-lasting benchmark in a pole,
wall or tree, and also useful for setting into a pre-drilled hole in concrete.
Item # Description 1-19 20-99 100+
BENCHTIE Vertical Surface Control Point (Yellow) 4.40 3.90 3.55
MULTI-PURPOSE FIELD BAG — REPELS WATER, RESISTS PUNCTURES
The Multi-Purpose Field Bag is designed with the surveyor in mind. It is made of
“Tough Duck” PVC backed fabric for maximum strength that will resist tears and
repel water. The bottom is layered with “Tough Duck” and a 1000 ballistic nylon
fabric to avoid punctures. This bag is 5” x 14.5” x 37” and available in uorescent orange.
Item # Description Each
MFIELDBAG Multi-Purpose Field Bag 174.85
LATH BAG — CARRY UP TO 50 LATHS IN COMFORT
The Berntsen Lath Bag is made from the same “Tough Duck” fabric and 1000
ballistic nylon as the Multi-Purpose Field Bag. This bag is 5” x 14.5” x 32” and
will carry 30-50 pieces of lath. Orange in color and has a convenient loop for a
hammer and sturdy shoulder strap.
Item # Description Each
LATH BAG 32” Lath Bag 78.15