Datasheet

PLIERS
83
3-674-15
3-675-15
3-673-15
CUTTING PLIERS
Cutting capacity
No. Length Head width Finish Wire mm Ø Weight
mm mm soft medium hard g
Side cutters
with rounded head
3-668-15 135 14 semi flush 2.0 1.5 0.7 110
Side cutters
with pointed head
3-669-15 135 14 flush 2.0 1.5 - 110
End cutters
Extremely slim, flush, for precision work at points difficult to reach
3-671-15 130 10 straight 0.8 0.6 - 65
3-672-15 130 10 cutting edge 20° 0.8 0.6 - 70
angular
Top cutters
extremely slim, flush, head 45° angular, for flush cutting
directly in front of and behind the components
3-673-15 130 10 cutting edge insiden 0.8 0.6 - 60
3-674-15 130 10 cutting edge inside 0.8 0.6 - 60
Oblique top cutters
cutting plane 29° angular, flush cutting for horizontal and vertical use
3-675-15 115 10 flush 1.2 1.0 0.4 65
3-671-15 3-672-15
Cutting capacity
No. Length Head width Finish Wire mm Ø Weight
mm mm soft hard piano g
Carbide mini side cutters
for continuous heavy work, with inserted carbide cutting edges,
also for tough nickel and electrode wires
3-661-15 120 11 semi flush, 2.0 1.0 0.6 70
very slim, rounded head
3-663-15 120 11 flush, very slim 1.8 0.8 0.4 65
pointed head with
special flat cutting edge
Carbide oblique top cutters
for continuous heavy work, with inserted carbide cutting edges, cutting
plane 29° angular, for horizontal and vertical use, also for tough nickel and
electrode wires
3-667-15 115 11 flush 2.0 1.0 0.6 65
Glass fibre mini side cutters
for continuous heavy work, with inserted carbide cutting edges,
with special side face, for cutting glass fibre only, max. Ø 2.0 mm
3-665-15 120 11 very slim rounded head, special flush 70
3-661-15
3-667-15
3-669-15
3-663-15
3-665-15
3-668-15
8383