Owner's Manual

MASTERING YOUR BERNINA
®
1/04/02 009DCC/4
BERNINA
®
009DCC
MASTERING
YOUR
BERNINA
®
COVER STITCH
Owner’s manual pg.___
• Following the instructions in the manual (page ___), thread the serger for cover stitch using thread
colors to match the color-coded threading path on the serger (use blue thread for purple markings).
• Center the fabric under the presser foot. Lift the presser foot and place the fabric completely
under the foot.
• Turn the handwheel clockwise for the first stitch.
• Serge to the end of the fabric.
• At the end of the stitching, turn the handwheel counterclockwise until the needles are at their lowest
position. Then turn the handwheel clockwise until the needles are at their highest position to release
the threads from the looper.
• Raise the presser foot and carefully remove the work.
• Cut the thread using the thread cutter.
• Examine the serger stitch formation and compare it to the stitch graphic on page__ of the Owner's
manual.
• Read the tension adjustments information on page__ of the Owner's manual for information about
the stitch formation and correcting any stitch irregularities.
• Make any necessary tension adjustments and serge another row of stitching.
• Trim and mount the sample.
Fabric: Firm fabric, 3” x 6”
Needle: 80/12 Universal
Thread: 3 cones of serger thread
(yellow, green, blue)
Presser Foot: Coverstitch