Operation Manual

06.2007 TR30G007 RE

A opener connection (Figure 5b)

Pin Signal

1.1 V~ (1) or V-

1.2 Signal to open

1.3 V~ (2) or V+

E opener connection (Figure 5a)

Pin Signal

1.1 E opener (1) - (V~ (1) or V-)

1.2 E opener (2) - switched (V~ (2) or V+)

1.3 –

Operator connection (Figure 3)

Both jumpers must be in position 1-2 to control an operator.

This supplies the volt-free change-over contacts of relay K1.

Pin Signal

1.1 .6 (nc)

1.2 .5 (com)

1.3 .8 (no)

Terminal strip (X2)/connecting a second operator:

Both jumpers must be in position 1-2 in order to control a second

operator. This supplies the volt-free change-over contacts of relay K2.

Pin Signal

2.1 .6 (nc)

2.2 .5 (com)

2.3 .8 (no)