User Manual

SKU # X | CROCHET 1 of X
X | CROCHET
BRC0502-012413M KEEP IN CHECK CROCHET BLANKET | CROCHET 2 of 2
KEEP IN CHECK CROCHET BLANKET | CROCHET
PANELS 2 to 5
Following shade changes shown
on diagram, work as for Panel 1.
Vertical Surface Slip Stitch: (RS).
Beg in marked ch at lower edge of
each Panel, join 2 strands of A with
sl st in marked ch. Keeping yarn at
back (WS) of work, sl st into each
ch-1 sp in alternate rows above
joining sp to create a straight
vertical chain of surface sl sts to
top edge. Fasten o.
Note: Take care to sl st loosely to
avoid pulling in work.
Panel Edging: Work Panel
Edging along sides of Panels 1 to
5 as indicated on diagram (outer
edging of Panel 1 and Panel 5 will
be completed after Panels are
joined).
With RS facing, join A with sl st at
lower or top corner of Panel. Work
1 row of sc evenly down side edge.
Fasten o.
Note: Take care to work same
number of sc along each side edge
for neat joining.
Join Panels: Place WS of Panels
1 and 2 tog. Beg at top edge of
Blanket, join A with sl st through
both corresponding sc from Panel
Edging. Taking care to work sts
loosely to avoid pulling in Panels,
work 1 row of slip st through both
thicknesses to join Panels.
Rep to join rem Panels, noting
all joining rows beg at top edge
of Blanket to insure the joining
rows are all worked in the same
direction.
Outer Edging: 1st rnd: (RS). Join
A with sl st at top right corner of
Blanket. Work 1 rnd of sc around
outer edge, working 3 sc in each
corner. Join with sl st to rst sc.
2nd rnd: Ch 1. Taking care to work
sts loosely, work 1 slip st in each
sc around. Join with sl st in rst sc.
Fasten o.
PANEL 1PANEL 2PANEL 3PANEL 4PANEL 5
Edging Edging Edging Edging