User's Manual

28
Connecting to Bluetooth
®
devices
Whenever the Bluetooth
®
function in the
SoundGate or in the external audio source has
been turned off, the devices must nd and connect
to each other again when turned on.
Reconnection tip
Normally, two paired Bluetooth
®
devices will nd
each other when turned on. If the devices do
not connect automatically, they must be connected
manually. Always turn on your mobile phone
before turning on the Bluetooth
®
function in the
SoundGate.
Refer to the manual of the mobile phone or audio
source for detailed instruction on how the device
connects and how connecting can be manually
operated.
Out of range handling of Bluetooth
®
If the SoundGate is brought out of the Bluetooth
®
range of the mobile phone, the connection will
be momentarily lost. Normally, the devices will
re-connect when they are inside the Bluetooth
®
range again. If the Bluetooth
®
connection is lost
during a phone call, the phone will hang up or
transfer the call from the SoundGate to the mobile