Technical information

6
The Berker radio bus components can be installed with little effort, quickly and neatly. In particular subsequent
additions, for example during renovations, are no problem.
You can simply replace the existing conventional equipment with modern radio bus components.
To do this, exchange an existing switch for a radio receiver and place a battery-operated
transmitter wherever your customers would like it.
But this system is also an interesting alternative for initial installations in new buildings or restorations,
because the radio bus system can always be adapted to suit new customer requirements.
The installation conditions do not matter here – Berker has the right components for any situation:
for surface-mounted and flush-mounted installation, for building into loads and hollow spaces, or
as a rail mounted for distribution box, or even as an adapter plug for a SCHUKO socket outlet.
What is more, with a radio-EIB converter it is possible to use the radio bus system as a subsystem of the
instabus KNX/EIB. This transmits the information from the radio bus system to the KNX/EIB system. This way
you can significantly expand the range of uses for your customers' building services.
And if your customers decide to move house at some point, you can re-install the radio bus components in
their new premises. So investing in the Berker radio bus system is worth it for your customers in any case.
The Berker radio bus system – the installation solution with practically unlimited possibilities.
VARIABLE USES, QUICK AND EASY TO EXPAND