Technical information

5
DEMANDS ARE INCREASING -
THE INSTALLATION SIMPLY GROWS WITH THEM
To adapt a room to new requirements means more than just moving the furniture, some paint
and some wall hangings. Generally it is also necessary to plan the lighting and
its control panels, and to meet requests for additional functions.
Previously, such changes meant knocking holes in the walls and routing additional cables. But now this mess,
noise and stress is a thing of the past. This is because the Berker radio bus components can be integrated
quickly and easily into the existing building services, without having to expand the mains. The new, flat
components can simply be fastened or bonded to an even surface, with no need for a wall box or wires.
The functional principle is "obvious": When a transmitter and receiver have
"learned" each other, then
radio waves can be sent by pressing a single button on the transmitter in the wall or on
the remote control, or even automatically via a motion detector. The receiver then
triggers a switching operation, without the need to route any wires between them.
Another good thing to know: The level of electromagnetic pollution from these radio signals is harmless.
Transmission power is many times less in comparison to mobile phones, and the
radio waves are only transmitted very briefly each time.
The Berker radio bus system – the simple and intelligent solution for practically any idea for change.