Technical information

47
RADIO MOTION DETECTOR POWER PACK FLUSH-M.
Function
■
Switching electrical loads for adjustable delay time
■
Brightness value can be set below which the switch is turned on if
a radio motion sensor/presence detector telegram is received
Special product features
■
ON/OFF switching for 2 hours (party function) via radio transmitter
possible
■
Suitable for outdoor installation
■
No integration into light scenes possible
Technical data
Rated voltage: 230 V ~, 50/60 Hz
Circuit breaker: 10 A
Power consumption: 1.1 W (in standby)
Making current: max. 20 A
On-time (retriggering): approx. 10 sec. to 15 min.
Brightness setting: approx. 3–80 lux
Breaking capacity
Incandescent lamps: 2300 W
HV halogen lamps: 2300 W
LV halogen lamps
- Conventional transformers: 1000 VA
- Tronic transformers: 1500 W
Fluorescent lamps
- uncompensated: 1200 VA
- parallel compensated: 920 VA
- duo circuit: 2300 VA
Teachable radio transmitters: max. 14
Operating temperature: -25 to +55 °C
Protection class: IP 55
Dimensions (W x H x D): 110 x 94 x 38 mm
Order no.: 0175 09
RADIO SIGNAL AMPLIFIERS SURFACE-MOUNTED
Function
■
Receiving radio telegrams and repeating the received telegrams to
increase the range
Special product features
■
60 radio transmitters can be taught
■
Suitable for outdoor installation
Technical data
Rated voltage: 230 V ~, 50/60 Hz
Teachable radio transmitters: max. 60
Operating temperature: -20 to +55 °C
Protection class
(depending on connection mode): IP 20/IP 54
Dimensions (W x H x D): 110 x 94 x 38 mm
Order no.: 0177 09
Status LEDs, setting potentiometers for brightness /
delay time and programming switch
Application variants for radio signal amplifiers (SV) –
no connection in series possible (see Diagram 3)