Technical information

4545
RADIO CONTROL UNIT 1–10 V BUILT-IN
Function
■
Switching and dimming of electronic ballasts or transformers with
1–10 V interface
■
Switching on to switch-on brightness for 1 min. when a radio motion
detector telegram is received
■
ON/OFF switching via button on the device (construction site function)
Special product features
■
The switch-on brightness can be saved
■
Possible to delete all of the taught-in transmitters (factory setting)
Technical data
Rated voltage: 230 V
~, 50/60 Hz
Power consumption: approx. 1.22 W (in standby)
Control voltage: 1–10 V
Control current: max. 15 mA
Electrical isolation 1–10 V: 2 kV basic insulation
Switching contact: Relay contact
Connected load
ohmic load: max. 1800 W
ballast, transformers: type-dependent
Upstream circuit breaker: 10 A
Operating temperature: 0 to +55 °C
Protection class: IP 20
Dimensions (L x W x H): 187 x 28 x 28 mm
Order no.: 0180
RADIO SWITCH ACTUATOR FLUSH-MOUNTED
Function
■
Switching electrical loads
■
Switching on for 1 min. when a radio motion detector telegram is
received
■
ON/OFF switching via button on the device (construction site function)
Special product features
■
Installation in flush-mounted box, surface-mounted distributor or light
canopy possible
Technical data
Rated voltage: 230 V ~, 50/60 Hz
Power consumption: approx. 0.56 W (in standby)
Switching contact: relay, 8 A
Circuit breaker 10 A
Breaking capacity
Incandescent lamps: 1000 W
HV halogen lamps: 1000 W
LV halogen lamps
- Conventional transformers: 750 VA, with at leas
t
8
5 % nominal load
- Tronic transformers: 750 W
Fluorescent lamps
- uncompensated: 500 VA
- parallel compensated (47 µF): 400 VA
- duo circuit: 1000 VA
Teachable radio transmitters: max. 14
Operating temperature: -20 to +55 °C
Protection class: IP 20
Dimensions: 52 x 23 mm
centre hole Ø: 7.5 mm
Order no.: 0179
Radio control unit 1–10 V RMD
0180
N
L
N L
BU
L
N
BN BN BK
ON/OFF
Prog.
Radio switch actuator
flush mounted
0179
Connection diagram radio control
unit 1–10 V with electronic ballast
Connection diagram radio switch actuator