Technical information

4444
RADIO SWITCH ACTUATOR BUILT-IN
Function
■
Switching electrical loads
■
Switching on for 1 min. when a radio motion detector telegram is
received
■
ON/OFF switching via button on the device (construction site
function)
Special product features
■
Connection of a push-button as an extension unit possible
■
Activation of the teaching mode via push-button extension unit possible
Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Switching contact: relay, 10 A
Breaking capacity
Incandescent lamps: 2300 W
HV halogen lamps: 2300 W
LV halogen lamps
- Conventional transformers: 1000 VA
- Tronic transformers: 1500 W
Fluorescent lamps
- uncompensated: 1200 VA
- parallel compensated 920 VA
- duo circuit: 2300 VA
Operating temperature: -20 to 55 °C
Dimensions: 175 x 42 x 18 mm
Order no.: 0125
RADIO UNIVERSAL DIMMER BUILT-IN
Function
■
Switching and dimming electrical loads
■
Switching on to switch-on brightness for 1 min. when a radio motion
detector telegram is received
■
ON/OFF switching via button on the device (construction site function)
Special product features
■
Automatic load detection
■
The switch-on brightness can be saved
■
Connection of a push-button as an extension unit or a BLC extension
unit possible
■
Short circuit and overload protection integrated
■
Possible to delete all of the taught-in transmitters (factory setting)
Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Connected load: 50-315 W/VA
230 V incandescent lamps,
HV halogen lamps: ohmic, phase cut-off
Berker Tronic transformers: capacitive, phase cut-off
Conventional transformers: inductive, phase cut-off
Power consumption: approx. 0.65 W (in standby)
Operating temperature: 0 to +55 °C
Protection class: IP 20
Dimensions (L x W x H): 187 x 28 x 28 mm
Order no.: 0181
Radio switch actuator built-in
0125
Radio universal dimmer built-in
0181
Connection diagram radio switch actuator
with programming switch/button
Connection diagram radio universal dimmer
with BLC extension unit
FACTS YOU SHOULD KNOW