Technical information

RADIO UNIVERSAL CORDED DIMMER
Function
■
Switching and dimming the connected loads
■
Switching on the connected load via an integrated button
(no dimming)
■
Switching on the connected load to the switch-on brightness for one
minute when a radio motion detector telegram is received
Special product features
■
Automatic load detection
■
The switch-on brightness can be saved
■
Can be installed as a replacement for existing conventional corded
dimmers or foot switches, e.g. for torchieres/floor lamps
■
Connection of mains-connected extension units (BLC extension unit,
mechanical push-button) is possible
■
Short circuit and overload protection integrated
■
Possible to delete all of the taught-in transmitters (factory setting)
Technical data
Rated voltage: 230 V ~, 50/60 Hz
Connected load: 50–315 W/VA
230 V incandescent lamps,
HV halogen lamps: ohmic load, phase cut-off
Tronic transformers: capacitive load, phase cut-off
Conventional transformers: inductive load, phase cut-off
Power consumption: approx. 0.63 W (in standby)
Operating temperature: 0 to +45 °C
Protection class: IP 20
Dimensions (L x W x H): 126 x 60 x 28 mm
Order no.: 0128
RADIO RECEIVER RMD
Function
■
Receiving radio telegrams and conversion to wire-bound data
■
Provision of the wire-bound data via a two-wire line to the radio
switch actuator RMD, radio universal dimmer RMD, radio control
unit RMD, radio shutter actuator RMD
Special product features
■
Top hat rail unit for central installation in the distribution box
■
Integrated antenna for receiving radio telegrams
■
Option connection for external antenna for difficult reception
conditions (e
. g. a metal distribution box)
Technical data
Rated voltage: 230 V
~, 50/60 Hz
Operating temperature: 0 to +45 °C
Permissible bus lines: e
. g. YCM 2 x 2 x 0.8 mm
2
or J-Y(St)Y 2 x 2 x 0.8 mm
2
Protection class: IP 20
Width: 36 mm (2 modules)
Order no.: 9405 01 00
41
L
Installation example with radio
universal corded dimmer
Installation with optional antenna