Technical information

RADIO ADAPTER PLUG SWITCH ACTUATOR
Function
■
For switching portable electrical loads with a mains plug (230 V ~),
e. g. table or floor lamps
■
Switching on the connected load via an integrated button
■
Switching on the connected load for one minute when a radio motion
detector telegram is received
Special product features
■
Fine-wire fuse for protection against overload can be exchanged
without opening the housing
Technical data
Rated voltage: 230 V ~, 50/60 Hz
Fuse: T 6.3 H 250 V
Breaking capacity:
Incandescent lamps: 1000 W
HV halogen lamps: 1000 W
LV halogen lamps
- Conventional transformers: 750 VA
- Berker Tronic transformers: 750 W
Fluorescent lamps
- uncompensated: 500 VA
- parallel compensated (47 µF): 400 VA
- duo circuit: 1000 VA
Power consumption: approx. 0.43 W (in standby)
Contact protection: enhanced contact protection
according to VDE 0620, Part 1
Protection class: IP 20
Operating temperature: -20 to +55 °C
Dimensions (L x W x D): 136 x 70 x 72 mm
Order no.: 0178 09
RADIO ADAPTER PLUG UNIVERSAL DIMMER
Function
■
For switching and dimming portable electrical loads with a mains plug
(230 V ~), e. g. table or floor lamps
■
Switching on the connected load via an integrated button (no dimming)
■
Switching on the connected load to the switch-on brightness for one
minute when a radio motion detector telegram is received
Special product features
■
The switch-on brightness can be saved
■
Automatic load detection
■
Fine-wire fuse for protection against overload can be exchanged
without opening the housing
■
Short circuit and overload protection integrated
■
Possible to delete all of the taught-in transmitters (factory setting)
Technical data
Rated voltage: 230 V
~, 50/60 Hz
Fuse: T 6.3 H 250 V
Connected load: 50–420 W/VA
230 V incandescent lamps,
HV halogen lamps: ohmic load, phase cut-off
Conventional transformers: inductive load, phase cut-off
Berker Tronic transformers: capacitive load, phase cut-of
Power consumption: approx. 0.63 W (in standby)
Contact protection: enhanced
contact protection
according to VDE 0620, Part 1
Protection class: IP 20
Operating temperature: +5 to 35 °C
Dimensions (L x W x D): 136 x 70 x 72 mm
Order no.: 0178 10 09
40
FACTS YOU SHOULD KNOW
Side view with with fine-wire overload fuse Front view with LED and programming button