Technical information

RADIO WALL TRANSMITTER INSERT
Function
■
Operation of radio bus actuators from any location via push-on
push-buttons
■
For mounting of push-buttons 1–4gang
■
Single control, light scene control or master control, selection of
functions via 4gang function switch on the insert
■
Battery switch for switching off the push-button (battery conservation)
Function of push-buttons
■
When a button is pressed, the insert sends telegrams that trigger the
selected function
■
Confirmation of button actuation by one transmit LED per channel
■
For single control two buttons/one split rocker per channel
Differentiation of short and long pressing of buttons when controlling
dimmer and shutter actuators (see table)
Button position Pressing Illumination Shutter
upper/left < 1 sec. Switch ON Lamella adjustment
> 1 sec. BRIGHTER dimming UP move operation
lower/right < 1 sec. Switch OFF Lamella adjustment
> 1 sec. DARKER dimming DOWN
move operation
35
ON
K1 +/-
K2 +/-
K3 +/-
Batt. OFF
open
TOP
Installation
■
Insert: in a flush-mounted or hollow wall box or a flat surface-
mounted housing
■
Push-button: Mount on insert with design frame
Technical data
Supply voltage: 6 V =
Batteries: 2 x lithium coin cells CR 2032
Battery service life: approx. 3 years, depending on
the frequency of switching
Battery empty indication: repeated flashing of all LEDs
when transmitting
Operating temperature: 0 to 55 °C
Dimensions: 71 x 71 x 13 mm
Order no.: 2764
Radio wall transmitter insert with battery cover
and function switch
Variants of push-buttons
1–4gang
(horizontal operation)
1-,2-, 4gang
(vertical operation)