Technical information

33
Detection
■
Size of the detection field: 16 m radius, 180° around the sensor
■
Cover plate for limiting the detection area and masking out sources
of interference include in scope of delivery (see illustration below).
■
At greater than 80 lux daytime operation motion detection is
deactivated to conserve battery power
■
Rotating and swivelling sensor head to adapt the detection area to
uneven terrain
■
Potentiometer for setting the detection sensitivity on the underside,
e. g. to reduce overreach
■
Brightness-independent walk test function to test detection in the
application environment – automatic activation upon commissioning –
display of motions by briefly (2 sec.) switching on taught-in receivers
RADIO MOTION DETECTOR 180
Function
■
Automatic, motion-dependent switching of the lighting in outdoor
areas
■
Monitoring of the detection area with PIR sensor
System integration
■
All switch and dimmer actuators: Switch the lighting with a delay time
of 1 minute with a fixed response brightness of 80 lux
■
Radio motion detector power pack surface-mounted: Delay time for
lighting and response brightness adjustable
Special product features
■
Not dependent on mains power, meaning that the mounting place for
optimal motion detection can be chosen freely
Technical data
Supply voltage: 9 V =
Battery: 9 V alkaline block battery
Battery service life: approx. 3 years
Battery empty indication: 10 x flashing of the LED after
transmitting
Detection radius: 16 m
Detection angle: 180°
Installation height: approx. 2.40 m
Sensitivity: adjustable between 20–100 %
Working range: 3–200 lux,
± 50 %
Sensor normal operation:
≤ 80 lux
Sensor night triggering:
≤ 200 lux
Sensor off: > 80 lux
Operating temperature: -25 to 55 °C
Protection class: IP 55
Dimensions (W x H x D): 80 x 75 x 115 mm
Order no.: 0174 01 09
1
2
1
2
Selective lateral limitation of the detection area
by means of cover plate
Frontal limitation of the detection area
by means of a cover plate