Technical information

Detection
■
Size of the detection field: Frontally approx. 10 m, to the sides
approx. 6 m
■
90° cover plate for limiting the detection area and masking out
sources of interference include in scope of delivery.
■
Brightness-independent walk test function to test detection in the
application environment – automatic activation upon commissioning
– display of motions by briefly (2 sec.) switching on taught-in
receivers
■
Potentiometer on the back of the radio motion detector
(see illustration) for setting the
- Response brightness under which the lighting control is activated
- Detection sensitivity
32
RADIO MOTION DETECTOR 180 FLAT
Function
■
Automatic, motion-dependent control of the lighting
■
Monitoring of the detection area with PIR sensor
System integration
■
All switch and dimmer actuators: switch the lighting with a delay time
of 1 minute
■
Radio motion detector power pack surface-mounted: For switching
the lighting with an adjustable delay time
Special product features
■
Flat shape, installation with screws or by bonding directly to an even
surface
■
Not dependent on mains power, meaning that the mounting place for
optimal motion detection can be chosen freely
■
Berker flush-mounted combinations can be expanded using radio wall
transmitters flat and multiple frames
+
Technical data
Supply voltage: 3 V =
Battery: Lithium coin cell CR 2450 N
Battery service life: approx. 2–3 years
Battery empty indication: repeated quick flashing of the
LED in the sensor window
approx. 1 sec. after transmission
Transmitter range: approx. 60 m (in free field)
Recommended installation height: 1.1 m
Detection angle: 180°
Operating temperature: -5 to 35 °C
Protection class: IP 20
Dimensions (L x W x H): depends on design
Order no.: 9420 ..
On the back radio motion detector 180 flat with battery
compartment and 2 potentiometers
Detection area with installation height of 1.10 m
FACTS YOU SHOULD KNOW