Technical information

RADIO WALL TRANSMITTER FLAT
Function
■
Operation of radio bus actuators from any location
■
Single, light scene or master control (selection via 4gang function
switch on the back)
■
Confirmation of button actuation by a transmit LED
Variants
■
1-, 2-, 4gang (vertical operation), 1– 3gang (horizontal operation)
Special product features
■
Flat shape, installation with screws or by bonding directly to an even
surface
■
Berker flush-mounted combinations can be expanded using radio wall
transmitters flat and multiple frames
Operation
■
Single control by pairs of opposite buttons (vertical operation) or a
split rocker (horizontal operation)
■
Short/long operation for shutter operation and dimming (see table)
Button position Pressing Illumination Shutter
upper/left < 1 sec. Switch ON Lamella adjustment
> 1 sec. BRIGHTER dimming UP move operation
lower/right < 1 sec. Switch OFF Lamella adjustment
> 1 sec. DARKER dimming DOWN
move operation
Technical data
Power supply: 3 V =
Battery: Lithium coin cell CR 2032
Battery service life: approx. 3 years
Battery empty indication: repeated flashing of all LEDs
when transmitting
Operating temperature: 0 to 55 °C
Protection class: IP 20
Dimensions (L x W x H): depends on design
Order no.:
2721 .., 2722 .., 2723 .., 2724 ..
RADIO HAND-HELD TRANSMITTER MINI
Function
■
Operation of all radio bus receivers from any location
(switching, dimming, shutters)
Number of channels
■
2 independent channels
Range of radio signal
■
Reduced due to compact shape, 30 m in free field
Technical data
Supply voltage: 3 V =
Batteries: Lithium button cell CR 2032
Battery service life: approx. 5 years, depending on
the frequency of switching
Transmitter range: approx. 30 m (in free field)
Operating temperature: 0 to 55 °C
Dimensions (L x W x H): 73 x 40 x 19 mm
Order no.: 2769
31
Radio wall transmitter flat with function switch
1
2
Transmit LED
2 channels
Overview of the operating elements of the
radio hand-held transmitter Mini