Technical information

1919
RADIO SWITCH ACTUATORS
RMD
These radio switch actuators
are intended for installation in
distribution boxes, and thanks to
their relay output stage they are
suitable for switching larger loads.
They process the signals from
the taught-in radio transmitters
received and forwarded by a radio
receiver RMD, and switch electri
-
cal loads.
The radio switch actuators RMD
can be integrated into light-
scenes. The 1gang actuator can
be operated via the extension unit
input using a push-button.
RADIO UNIVERSAL DIMMER RMD
The radio universal dimmer RMD
is built into the distribution box
and automatically detects what
load is connected. It processes
the signals from the taught-in
radio transmitters forwarded by a
radio receiver RMD, and switches
or dims lighting.
The radio universal dimmer RMD
can save the switch-on bright-
ness, and can also be integrated
into light scenes.
RADIO CONTROL UNIT
1–10 V RMD
This control unit is built into the
distribution box, and enables
radio-controlled switching and
dimming of electronic ballasts and
Tronic transformers with a 1–10 V
interface (e. g. fluorescent and
LV halogen lamps). Here the
signals received from all taught-in
transmitters are transmitted to the
control unit via a radio receiver
and the top hat rail data connection.
The radio control unit 1–10 V RMD
can save a switch-on brightness,
and can also be integrated into
light scenes.