Technical information

1717
BLC RADIO BUTTON
The BLC radio button is mounted
on a BLC dimming or switching
insert, which can be used in the
same place as the exisiting switch.
BLC inserts are available for all
commonly-used loads (e. g. incan
-
descent lamps, electronic trans-
formers). The BLC radio button
can be operated directly manually,
or triggered via any desired radio
transmitter of the radio bus sys-
tem. The switch-on brightness can
be saved individually. Radio trans-
mitters can be used to call up
ON/OFF states and dimming
values for up to 5 light scenes.
ROLLOTEC RADIO BUTTON
The RolloTec
®
radio button in
combination with the RolloTec
®
insert forms a flush-mounted
activation device for blind/shutter
motors. To complement this,
brightness, wind and glass break-
age sensors can be connected.
The blind/shutter control can also
be integrated into light scenes and
operated via all of the transmitters
of the radio bus system (except
for radio motion detectors and
presence detectors).
RADIO ADAPTER PLUG
SWITCH ACTUATOR
When plugged into a SCHUKO
socket outlet this adapter plug
allows flexible integration of
movable loads (e. g. floor lamps,
stereo system) into the Berker
radio bus system.
Switching commands of the
taught-in radio transmitters are
detected, and trigger switching of
the connected load.
Switching on is also possible on
the device using the integrated
button. Moreover, the radio
adapter plug can be integrated
into light scenes.
THE RECEIVERS