Technical information

1616
RADIO WALL TRANSMITTER
INSERT
The radio wall transmitter for
flush-mounted installation must be
complemented with a frame and
push-button (1– 4gang). The com
-
ponents merely have to be plugged
into each other. Up to 4 channels
or 5 light scenes and a master
OFF command are possible. Each
channel can be allocated to as
many radio receivers are required.
A flat housing for surface-mounted
installation is available as an
accessory. In this manner the
radio wall transmitter insert can be
installed in any location, and can
even be used as a tabletop device
(e. g. in conference rooms).
RADIO TRANSMITTER FLUSH MOUN-
TED WITH PHASE-CONDUCTOR
Compact and versatile – this radio
transmitter be operated down-
stream of light or shutter switches
in deep flush-mounted wall boxes
connected to mains.
The 2 channels can each be
assigned to any desired number
of radio receivers. Depending on
the mode, commands for switching
lights or opening/closing shutters
are sent.
Existing installations of timers,
motion detectors, etc. can easily
be integrated into the radio bus
system using this transmitter.
RADIO WALL PUSH-BUTTON INTER-
FACE FLUSH-MOUNTED 4GANG
This
flush-mounted push-button
interface expands an existing instal-
lation with wireless transmission of
switching, dimming, blind/shutter
motion and light scene commands.
Its extremely flat shape means that
the insert can even be installed in
standard flush-mounted boxes.
The inputs E1 to E4 are controlled
via potential-free contacts.
This push-button interface is
particularly suitable for the
series Berker TS.
GREAT COMPONENTS FOR EvERY AREA OF APPLICATION
THE TRANSMITTERS