MB BREAD SLICER TECHNICAL MANUAL SPECIFICATION SHEET INSTALLATION INSTRUCTIONS OPERATION INSTRUCTIONS CLEANING INSTRUCTIONS MAINTENANCE INSTRUCTIONS TROUBLE SHOOTING INSTRUCTIONS WIRING DIAGRAMS CATALOG OF REPLACEMENT PARTS RECOMMENDED SPARE PARTS LIST
Need other Hobart Services? • Warranty Registration • Delivery and Installation • Preventive Maintenance • Hobart Service Contracts • Extended Warranty Contracts • Parts and Accessories • Specialty Programs • Water Treatment Programs Berkel MB Bread Slicer Technical Manual Page 2 of 35
Form BK45731 (04-07) Berkel MB Bread Slicer Technical Manual Page 3 of 35
Form BK45731 (04-07) Berkel MB Bread Slicer Technical Manual Page 4 of 35
OWNER/OPERATOR MANUAL MODEL MB BREAD SLICER NOTICIA IMPORTANTE Este manual contiene importantes instrucciones de seguridad que deben ser seguidas el pie de la letra cuando utilice esta maquina. 12 MBO /O M IMPORTANT NOTICE This manual contains Important Safety Instructions which must be strictly followed when using this equipment.
B ()25( 86,1* 7+,6 (48,30(17 Berkel’s slicers are designed to slice bread and other food products safely and efficiently. However, unless the operator is properly trained and supervised, there is the possibility of a serious injury. It is the responsibility of the owner to ensure that this slicer is used properly and safely, strictly following the instructions contained in this manual and any requirements of local law. No one should use or service this slicer without proper training and supervision.
TABLE OF CONTENTS Page General Safety Instructions .............................................................................................................. 2-3 Equipment Identification ..................................................................................................................... 4 Intended Uses and Safety Characteristics ............................................................................................ 5 Unpacking and Installation .....................................
PELIGRO CUCHILLA FILOSA para evitar serios accidentes a su persona siga las instrucciones de este manual y 1. NUNCA utlice esta maquina sin previa instrucciùn y autorizaciùn de su supervisor. 2. SIEMPRE vea que la base del recipienta este bien atornillada y bien apretada. 3. LOS PROTECTORES deben estar en su lagar, ANTES de enchufar y conectar la maquina. 4. USE SIEMPRE el enchufe de tres clavijas suministrado. 5. NUNCA use nada mas ademas que el prensador para alimentar la maquina. 6.
WARNING SHARP KNIFE BLADE to avoid serious personal injury follow all the instructions in this manual and 1. NEVER touch this machine without training and authorization by your supervisor. 2. ALWAYS turn off and unplug this machine before cleaning or servicing. 3. ALWAYS use the handle provided to lift the cutting frame assembly and ensure the cutting frame asembly is in its raised and locked position before loading. 4. ALWAYS keep hands away from the cutting assembly area. 5.
EQUIPMENT IDENTIFICATION Bread Rack Bagging Trough Operators Handle Pilot Light Oilers Handle ON/OFF Switch Scrap Pan 4 • MB OWNER /OPERATOR MANUAL Berkel MB Bread Slicer Technical Manual Page 10 of 35
INTENDED USES AND SAFETY CHARACTERISTICS INTENDED USES The model MB Bread Slicer is designed for cutting the following types of products: • Bread or dough products • Onions • Mushrooms The following types of items are NOT suitable for slicing on the Model MB Bread slicer: • Non-food products • Meats • Cheeses SAFETY CHARACTERISTICS Automatic shut off at the end of the cutting cycle. Automatic shut off if the slicer is not level. UNPACKING AND INSTALLATION WARNING The slicer is very heavy.
Note: The model and serial number plate is located on the right side of the bread slicer near the master power switch. OPERATION LOADING THE LOAF 1. Plug the slicer in. The pilot light will illuminate. 2. Turn the ON/OFF switch (the toggle switch on the lower right hand side of the bread slicer) to the “ON” position. 3.
2. Place your right and left hands against the respective ends of the sliced loaf. 3. Gently squeeze and lift the loaf off the rack and place it on the bagging trough at the front of the bread slicer 4. Slide the bag over the sliced loaf. 5. Push the bread and bag off the trough and set it aside. 6. Continue to slice using the same procedure as just described. WARNING To prevent the possibility of serious cuts, be sure to always return the master switch to the “OFF position when not using the bread slicer.
weekly, but possibly sooner if needed, to maintain lubrication. Once oil has been put in the cups, close them by turning clockwise. WARNING To prevent product contamination, only use USDA authorized oil. Note: USDA authorized Berkel oil is available in 2 ounce (4675-00182), 16 ounce (4675-00183), and 1 gallon (4675-00184) containers. TROUBLESHOOTING ELECTRICAL FAILURE 1. Is the pilot light illuminated? • Is the power cord completely plugged into the wall outlet? • Check the power cord for cuts or breaks.
SPECIFICATIONS CAPACITY Loaves up to 15 ½” (394 mm) length. Cycle time is approximately 8 seconds per loaf. WEIGHT Net Shipping 210 lbs. (95 kg) 240 lbs.
WARRANTY Berkel Company (“Berkel”) warrants to the Buyer of new equipment that said equipment, when installed in accordance with our instructions and subjected to normal use, is free from defects in material or workmanship for a period of one (1) year from the date of sale.1 BERKEL SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
MB BREAD SLICER ELECTRICAL WIRING DIAGRAM WITH MERCURY SWITCH Berkel MB Bread Slicer Technical Manual Page 17 of 35
01-402675-00053 MIRCO SWITCH 01-402675-00946 01-404175-00731 01-402675-00617 MB BREAD SLICER ELECTRICAL WIRING DIAGRAM WITH MICRO SWITCH DERIVED FROM 01-409213-00026 AI 2830 Berkel MB Bread Slicer Technical Manual Page 18 of 35
Model MB Bread Slicer Exploded Views and Parts List BK46722 Berkel MB Bread Slicer Technical Manual Page 19 of 35
Berkel MB Bread Slicer Technical Manual Page 20 of 35
BLADE AND FRAME ASSEMBLY ITEM # DESCRIPTION 1 Blade Assembly, Standard Blade Assembly, Chrome Onion Blade Assembly, Stainless Steel 2 Lug Plate Screw 3 Knife Lug Tab 4 Knife Frame Complete, Upper 3/8" Knife Frame Complete, Upper 7/16" Knife Frame Complete, Upper 1/2" Knife Frame Complete, Upper 3/4" 5 Bushing, 5/8" ID 6 Revolving Oiler Sleve 7 Lug plate set - front and rear 1/2" Lug plate set - front and rear 7/16" Lug plate set - front and rear 3/8" 8 Blade retaining nut 9 Knife Frame Complete, Lower 3/8"
Berkel MB Bread Slicer Technical Manual Page 22 of 35
INNER FRAME ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 DESCRIPTION Bagging Trough Flat head screw Flat head screw Flat head screw Spacer Rubber pad Hex nut Shim Knife bearing bracket, white Screw Front cover, white Groove pin Frame operating handle Screw Internal tooth lockwasher Washer Hex screw Setscrew Front block Bagging trough spacer Pivot bolt Setscrew Bushing Hex nut Eccentric pin Cam roller Bushing Shim Lockwasher Retaining ring Onion Chute PART NUMBER
Berkel MB Bread Slicer Technical Manual Page 24 of 35
CAMS, LINKAGES AND SCRAP PAN ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 DESCRIPTION Bread Cam, Pair Connecting cam link Sholder screw Hex Bolt Spacer Hex Nut Hex Bolt Set Screw Locating Bracket Support Bracket Set Screw Taper Pin Taper Pin Scrap pan support assembly L.H.
Berkel MB Bread Slicer Technical Manual Page 26 of 35
OUTER FRAME ASSEMBLY ITEM # 1 2 3 4 5 6 7 9 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 37 38 39 40 41 42 43 44 45 46 47 48 51 52 53 54 55 56 N/S DESCRIPTION Left side frame assy.-white Lockwasher Hex nut Socket head cap screw Front frame brace-white Hex bolt Stationary trough support Lockwasher Hex bolt Setscrew Frame brace, bottom Lockwasher Pivot plunger Setscrew Plunger support, bottom Bracket Assy.
Berkel MB Bread Slicer Technical Manual Page 28 of 35
RACK ARRANGEMENT ITEM # DESCRIPTION 1 "L" Shaped Cover, White 2 3 4 5 6 7 8 Screw Stationary trough assy 1/2" Stationary trough assy 7/16" Stationary trough assy 3/8" Movable trough assy 1/2" Movable trough assy 7/16" Movable trough assy 3/8" Hex Bolt Lock Washer Hex Bolt Lock Washer PART NUMBER 3875-00163 2175-03051 3A-07324-2E 3A-07324-10C A-07324-14 A-07324-1D A-07324-12 A-07324-13 2175-00210 2275-03055 2175-00231 2275-03065 Berkel MB Bread Slicer Technical Manual Page 29 of 35
Berkel MB Bread Slicer Technical Manual Page 30 of 35
CRANKSHAFT, MOTOR, AND COVER ITEM # DESCRIPTION 1 Machine cover - white, plastic Machine cover - chrome 2 Warning label 3 Pan head screw 4 Lockwasher 5 Flat washer 6 Hex nut 7 Hex bolt 8 Square head bolt 9 Rubber cover spacer 10 Hex nut 11 Switch to motor cord 12 Connecting rod & bearing assy 13 Motor base assembly 14 Motor 15 Bolt 16 Belt 17 Crankshaft & bracket assy.
Berkel MB Bread Slicer Technical Manual Page 32 of 35
SWITCH MECHANISM ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 37 N/S N/S N/S N/S N/S N/S N/S DESCRIPTION Switch to motor cord Wire clamp Truss head scerw Socket screw Hex nut Torsion spring Lever latch Washer Cotter pin Wire nut Operating lever assembly Mercury switch Switch box cover Shim Flat head screw Lockwasher Pan head screw Lockwasher Mercury switch clamp Pivot bushing nut Power cord Operating rod knob Operating rod Switch operating rod Knob
BK46722 Berkel MB Bread Slicer Technical Manual Page 34 of 35
MB BREAD SLICERS MARCH 2010 PRODUCT SERVICE DEPARTMENT TROY, OH.
