Technical data

Rotate the bearings with your fingers. If there is an irregular rotation, if they are tight and binding or if they
have a granular feel, as if there is sand in the bearings - it probably indicates that the bearings have been dam-
aged in removal and must be replaced.
B. GEAR REPLACEMENT
• If either of the gear cluster assemblies (4575-0285 or 4575-0286) are to be replaced, you would order the
respective assembly.
• If gear drive assembly (4375-0132) must be replaced, the assembly will be shipped complete except for the
rear bearing. The rear bearing can be pressed off the assembly and reused if not damaged.
• If a gear in the clutch assembly - front - (4375-0134) must be replaced, it will be shipped as a complete assem-
bly except for the rear bearing which is re-useable.
• If a gear in the rear clutch assembly (4375-0135) must be replaced:
a. Press off gear cluster (4575-0293) and rear bearing at the same time. The gear cluster (4575-0293) can be
ordered as a separate part.
b. Be sure to keep washer (3275-0010) for use in reassembly.
c. The rest of the assembly (4375-0135) will come already assembled.
S6151-DL-MMM-010
1-24