Technical data

The gear box housings are fitted at the factory using Loctite No. 510 Gasket Sealant (1875-0035) to form the
gasket. Under the normal process of taking out the two dowel pins (2275-4221), step No. 6, the two halves will
loosen. Loctite No. 510 is used only on the housing halves. Loctite No. 290 is used on all other parts per direc-
tions that follow.
A. Gear Box Disassembly
1. After detaching the motor and flexible coupling, remove the motor adaptor assembly by unscrewing the 4
bolts that attach it to the gear box.
2. Remove 2 support pins (3375-0697) and drain the oil (Gear E.P. - Hi V.I.). There are 1% oz. of this lubri-
cant (1875-0004) in the gear box but it is very thick, so will drain very slowly.
3. Remove 5 socket screws 1/4 x 1/2 (2175-1751).
S6151-DL-MMM-010
1-20