Technical data

FLEXIBLE COUPLING REPLACEMENT (2375-0095)

This ﬂexible coupling is designed to break if extreme torque is encountered by the cutting blades jamming.

If it breaks, you will have the motor running freely and either no power delivered to the gear box, or there will

be erratic and jerky action of the cutting blades.

• Remove upper housing and visually inspect.

• Replace as previously described.

GEAR BOX REPAIR

READ THESE DIRECTIONS FULLY BEFORE MAKING A DECISION TO REPAIR

The gear box is repairable if reasonable caution is exercised in dismantling and reassembly.

TOOLS & MATERIALS Other than the normal service tools and supplies, you will need the following to repair

the 705 Gear Box:

• Gear Box Assembly Fixture (4675-0426-F-2).

NOTE

The above can be ordered through the Berkel Service Center, LaPorte, Indiana.

• Loctite 290, Self Wicking Adhesive. (Loctite Corporation, Newington, Conn. 06111).

• Loctite 510, Gasket Sealant. (Loctite Corporation, Newington, Conn. 06111).

• Gear Oil - E.P. - Hi V.I. (Type, Arco-Penet E.P.S. 7000).

•.Arbor Press with variable opening ﬁxture.

• Cotton Applicators.

S6151-DL-MMM-010

1-19