Technical data

B. MOTOR REPLACEMENT If rest of electrical system is working but motor does not operate, DISCON-

NECT POWER SUPPLY AND REPLACE MOTOR:

1. Disassembly:

a. Remove bolt that holds motor support brackets in place and remove brackets.

b. Lift entire motor, adaptor assembly and gear box from lower housing as one unit and set on bench.

c. Unscrew set screw from gear box end of ﬂexible coupling.

d. Remove four (4) screws from motor adaptor assembly and slip motor and coupling out of motor adaptor

assembly.

e. Unscrew set screw from ﬂexible coupling on motor shaft.

NOTE

If coupling is worn - replace.

S6151-DL-MMM-010

1-15