Technical data

D. STRIPPER PLATE On occasion you will find that the Stripper Plate has been damaged. If badly bent or if
teeth are missing replace.
If teeth are bent out of line they can usually be straightened by hand or with pliers.
CAUTION
Make sure that spacing between teeth is accurate so there is no interference
with the cutting blades. If problem continues replace with a new stripper
plate.
SAFETY COVER (9234-0020)
If the cover is broken, replace as entire unit.
A. MAGNET If the magnet is replaced, position it so that the red dot is at the top. Fix in place with No. 1875-
0035 sealant.
S6151-DL-MMM-010
1-10