Technical data

NOTE
BLADE SHAFTS ARE NOT INTERCHANGEABLE.
4. Raise locking plate up to lock plates in place.
5. Replace tenderizer unit as previously shown and slide to left to engage clutches.
6. Replace safety cover by retracting pivot pin and lowering safety neck into closed position.
7. Plug power cord into wall receptacle.
The tenderizer is now ready for use.
BERKEL MODEL 705 - SPECIFICATIONS
CONSTRUCTION: Corrosion resistant, steel frame, stainless burnadized aluminum housing.
TENDERIZING GROUP: Stainless steel blades nylon spacers, stainless steel strippers.
SAFETY FEATURES: Clear Lexan safety cover, magnetic interlock cuts power when cover is raised, braking
system brings rollers to rapid stop, and finger guards under roller blades.
PRODUCT CAPACITY: 1 1/4″ x 7 7/8″.
DIMENSIONS: Width 16″ x Depth 13 2/3″ x Height 16″.
MOTOR: 1/2h.p., 115 V-60-1, 6.9 amps, thermally protected. Optional motor available, 220 V-50-1.
TRANSMISSION: Direct gear drive, resiliently coupled, enclosed with permanently lubricated gear box.
OUTPUT SPEED: 120 R.P.M.
NET WEIGHT: 60 LBS.
SHIPPING WEIGHT: 72 LBS.
S6151-DL-MMM-010
1-6