Technical data

9. All removable parts can be soaked and scrubbed with a bristled brush and a good quality detergent approved
for food processing equipment.
10. Rinse thoroughly and set aside to air dry while you are washing the machine case.
11. Sanitize all tenderizer parts and tenderizer.
REASSEMBLY
1. Replace stripper plates with solid flanges to the outside of the assembly, teeth to the center, and teeth up.
(Stripper plates are interchangeable).
2. Inspect blades (especially if blades have been jammed by bone segments or have been mishandled). If any of
the blades in the assembly are bent - replace with a new blade immediately, otherwise you could damage the
other blade assembly!
3. With lockplate down, grasp blades by shaft ends and replace. Match color end plugs on blade to matching
colored dots on frame. Red for rear blade - Black for front blade.
S6151-DL-MMM-010
1-5