Technical data

CLEANING AND MAINTENANCE
1. TURN OFF MACHINE AND UNPLUG ELECTRICAL CORD.
2. Remove safety cover (9234-0020) by raising and pulling the spring loaded pivot knob to your left. Lift out.
3. Wash and rinse the safety cover and set it aside to air dry. Sanitize with an approved plastics sanitizer before
reassembling.
4. Grip the blade frame assembly (4375-0021) at the center of the frame sides. Move to the right and disengage
from clutch. Lift out and set it on working surface.
5. Push locking plate on right side of tenderizer unit down.
CAUTION
HANDLE BLADES ONLY BY SHAFT ENDS TO AVOID CUTTING
HANDS.
S6151-DL-MMM-010
1-3