Technical data

5. Lower the safety neck forward into the operating position.

NOTE

THIS TENDERIZER WILL NOT OPERATE WITHOUT THE SAFETY NECK

IN PLACE. NEVER RAISE OR LOWER THE SAFETY NECK WITH THE

MACHINE TURNED ON, BOTH FOR PERSONAL PROTECTION AND

MACHINE PROTECTION. ALWAYS TURN MACHINE OFF WHEN NOT IN

USE. ONLY RUN MACHINE BY USING THE ON-OFF SWITCH - NEVER

BY RAISING THE NECK.

6. Uncoil power cord and plug it into the speciﬁed electrical receptacle. (Speciﬁcations for this machine are

found on the plate located on the left hand leg.)

7. Turn OFF-ON rocker switch to ON. If cutting knives do not rotate, turn machine OFF and unplug electrical

cord.

Lack of rotation indicates that the clutches are not engaging. Raise the safety shield and slide the tenderizer

assembly to the left. Lower safety shield, plug in electrical cord and turn ON.

The tenderizer is now ready for use.

S6151-DL-MMM-010

1-2