Datasheet

NA – Not Applicable NE – Not Established UN – Unknown rev 06/15/05 1 of 4
HEALTH
0
FLAMMABILITY
0
REACTIVITY
0
Material Safety
Data Sheet
(MSDS)
PERSONAL PROTECTION
--
Date of Issue: 11/7/05 Date of Rev: 3/20/97 Date of Review:: 11/7/05
SECTION I – MANUFACTURER AND PRODUCT INFORMATION
Manufacturer Name: The Bergquist Company
Trade Name: Sil-Pad 900S
Chemical Name or Synonym: Thermally Conductive Silicone Rubber
Emergency Telephone Information
CHEMTREC: [phone]
Info Telephone: [phone]
Mfg. Address: 18930 West 78
th
St Use: Electrical Insulation & Heat Conduction
City: Chanhassen State: MN Zip: 55317
SECTION II – HAZARDOUS INGREDIENTS
CAS Number Chemical Name
0000A-00-o Non-Hazardous Ingredients
Percent PEL C S TLV C S Units 313
100 NA N
CAS Numbers with letters are codes for items with no valid CAS assignments;
“PEL” is OSHA Permissible exposure Limit;
“C” indicates the standard is a Ceiling value;
“S” indicates the chemical has a “Skin Contact” notation;
“TLV” is Threshold Limit Value;
“313” indicates ingredient is reportable under SARA Title III, Section 313.
Additional
Information
Product as supplied is considered an “Article” as defined by 29 CFR 1910.1200, OSHA Hazard Communication Standard.
SECTION III – HAZARDS IDENTIFICATION
Emergency Overview:
Product is considered non-hazardous under normal and expected usage.
Eye Health Effects/Symptoms:
Flush with water. Particles should be removed by physician.
Skin Health Effects/Symptoms:
Wash with soap and water to remove residue.
Inhalation Health Effects/Symptoms:
None
Ingestion Health Effects/Symtoms:
Consult Physician