User Manual

27
EN
SPECIAL MAINTENANCE
Depending on the conditions of use of the firearm, and at the end of
the hunting season, Beretta recommends you carry out the following
extraordinary maintenance operations in order to keep the shotgun in
perfect working order.
BREECH BOLT ASSEMBLY
(Breech bolt, operating rods with sleeve, recoil spring, and piston stop).
• Spray the parts and clean with Beretta Gun Oil.
• Thoroughly dry with a soft cloth and lightly lubricate.
TRIGGER PLATE
• Thoroughly clean the parts with a soft cloth.
• Lightly lubricate all the metal components and the trigger plate retaining pin.
RECEIVER
• Proceed as indicated for the breech bolt. Clean thoroughly with a soft cloth
and lubricate the internal breech bolt guides.
CAUTION: Do not attempt to carry out repairs to any firearm without
proper knowledge or training. Do not alter parts or use substitute parts not
manufactured by Beretta. Any alterations or adjustments that may be necessary
to the operating mechanism should be performed by the Manufacturer or by its
Local Authorised Distributor.