User Manual

the spring holder, to force the breech bolt out from the receiver (Fig. 15).

TRIGGER PLATE

NOTICE: The trigger plate only needs to be disassembled in order to clean the

trigger mechanism.

• Engage the safety (the hammer is cocked) (Fig. 3).

• Press the carrier stop push button, if it has not already been pressed (Fig. 1).

• Remove the trigger guard retaining pin by pressing with a pin punch or an awl

(Fig. 16 and 17).

• Keeping the release button pushed all the way down, remove the trigger plate

from the receiver using the trigger guard as a lever, ﬁrst in the direction of the

barrel and then outward (Fig. 18, 19 and 20).