Install Drawing

1
700312-5/Miscellaneous/rapport M-02
RECOMMENDED INSTALLATION
Follow instructions as
per corresponding
tractor model.
Go to specific page &
step, follow instructions
but apply these specific
instructions mentioned
below.
Page 7 & 8
Install mounting
brackets with
sleeves or washers.
Page 9
Attach the tiller’s hitch
(insert shims if
required).
Page 9
Attach the tiller’s hitch
in the # of holes from
the top.
Page 12
Install the adjustable
link in the hole #
indicated below.
Page 12
Do you need
to drill a
hole?
Page 12
Length required
between the
holes.
Page 13
Install the required
primary belt.
SPECIFIC MODELS
John Deere L120
(2005)
2–Sleeves
A-Supports
2 7 1 No 6" A-58
John Deere 145
(2006)
2–Sleeves
A-Supports
0 7 1 No 5 3/4" A-58
John Deere X540
3-Sleeves
A-Supports
In the 13/32" holes
0 5 5 No — A-62
John Deere X340
2-Sleeves
A-Supports
2 7 5 No — A-58
John Deere X320
2008
No sleeves
A-Support
0 6 3 No 6 1/4’’ A-58
Columbia C.V.T.
13 AP6065597
(2006)
1-(4) Washers
B-Supports
4 5 4 Yes 5 1/2" A-53
Cub Cadet
LT1046
2-Sleeves
A-Supports
1 6 6 No 6" A-53