User's Manual

-12-
11. Plug the randomly congured data cable into the TYPE-C socket at the
back of the machine, the other end of the data cable is connected with the
adapter, and the adapter is plugged into the power outlet that meets the voltage
requirements. After being powered on, various functions can be used through
the touch screen operation.
Note: when choosing an adapter, make sure that the output voltage of the adapter is 5V
and the output current is not less than 2A. Adapters that do not meet this requirement
cannot be used.
The data cable is plugged
into the TYPE-C Jack
Plug the data cable into the TYPE-C Jack on
the back of the whole machine