User's Guide
Table Of Contents
10. Restart the devices that you changed. Select the Download button. The Error Check
dialog box is displayed.
11. Click OK. The Download Configuration dialog box is displayed.
12. Click the check box next to each device you need to restart. Click Start Download.
Restarting a device may take one or five minutes.
13. Verify the status of device(s)you restarted.
a. In the Yokogawa Field Wireless Management Console, open Monitor.
b. In the tool bar, click the Field Device List button. The Field Device List dialog box is
displayed.
c. For each type of device, verify that the status of each type of Ranger Pro device is:
70M300
Repeater
70M301 Single Axis
70M303
Tri-Axis
Configuration Status Not Published Published Published
If the status is Session Timeout, you must resolve the timeout issue before
proceeding.
14. To verify the device status:
a. In the Yokogawa Field Wireless Management Console, open Configurator.
b. Select Sampling Data. The Sampling Data pane is displayed.
c. Click Edit. The Sampling Settings dialog box is displayed.
d. Verify that the firmware version, CFfile version, and OID parameters are correct for
the device.
Provision Devices
To provision Ranger Pro devices on a Yokogawa ISA100 gateway:
1. In the Yokogawa Field Wireless Management Console, open Monitor.
2. Choose Tools >OTA Provisioning Manager.
3. To allow unprovisioned devices to join, select Enable Provisioning Network. Wait for
unprovisioned Ranger Pro devices to display in the Provisioning Network list. Wait time
may be 5 to 30 minutes and depends on the 3rd party ISA network.
4. In the Target Device tag field, select the device tag assigned to the device.
5. Select the devices desired and choose Start Provisioning.
6. Wait for all devices to be provisioned and display in the Operating Network List.
Depending on the number of devices and their current sleep state, provisioning may take up to
several hours. If a device fails to join the network, see Reboot the Device on page27.
23/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F