User's Guide

Ranger Pro Components
The Ranger Pro device is composed of these parts:
l Case. Contains the vibration and temperature sensors and forms
the device housing (316 stainless steel body).
l Wireless e-module (glass-reinforced, impact-resistant PPS).
l E-module retaining ring (316 stainless steel body).
l Battery (replaceable D-sized 3.6V lithium-thionyl chloride).
l Battery retaining ring (316 stainless steel body).
l Two O-ring seals (35x1mm on sensor body and 34x1 mm on e-
module).
Use only approved D-sized lithium-thionyl chloride batteries for the
Ranger Pro sensors and repeaters. If you use the wrong battery,
you can negatively affect device performance, produce
inaccurate readings, and void the Ranger Pro warranty. You can
purchase approved batteries from Bently Nevada or third-party
suppliers. For details and ordering information, see the Ranger Pro
Datasheet (document 125M5237).
Network Requirements
Ranger Pro devices operate on compatible WirelessHARTand ISA100.11a
wireless networks and gateways. Additional licenses may be required to
activate these gateways.
ISA100 Network requirements
Manufacturer Gateway Router
Bently Nevada Ranger Pro Gateway N/A
Yokogawa YFGW410 (R2.01.04 or
equivalent)
YFGW410 (R2.01.04 or
equivalent)
Honeywell
WDM (R310.2-4 or later) FDAP (OW 230 or later)
CISCO 1552S
Honeywell OneWireless Wireless Device Manager using firmware R310.2-4 limits the maximum number
of RangerPro wireless devices to 140 per gateway. To increase the limit to 160 or more devices, upgrade
to a newer version of the firmware when available.
WirelessHARTNetwork requirements
Manufacturer Gateway Router
Emerson
Wireless 1410/1420 Gateway (4.7.84 or later) N/A
10/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F