User manual

BASIC CONFIGURATION

1 - INTRODUCTION

1.4 Basic Configuration

The following devices are required to operate the drive. Proper peripheral devices must be selected and

correct connections made to ensure proper operation. An incorrectly applied or installed drive can result

in system malfunction or reduction in product life as well as component damage. You must read and

understand this manual thoroughly before proceeding.

[1] 3 or 5% Line Reactor

EMI RFI Suppression

Isolation Transformer

Passive Filter

Active Filter

[2] DC Bus Voltage

- Connection for 18 pulse frontend

- Multi-Drives

DBR Dynamic Braking Module

Line Regeneration Module

[3] B+/DB Connection [4] 3 or 5% Line Reactor

Long Lead Filter

Sine Wave Filter