User manual

104

Vin2Cong I/O27

I/O: Vin2 Cong

27 0 - 10V

7 - PARAMETER DESCRIPTION

LCD Display

Description This parameter selects the type of signal for analog input Vin2. I/O 29 (Vin2 Offset) and I/O 28 (Vin2

Span) may be used to customize the selected range.

See also DRV 05 & I/O 28, 29, 30, 31

“Description of Control Terminals” on page 41.

Parameter Value Function

0 - 10V (Default) 0-10Vdc signal

0 - 10V Brk W 0-10Vdc signal with broken wire detection for speed pot operation

0 - 10V I 0-10Vdc signal inverted

0 - 10v Bipol 0-10Vdc signal, 5Vdc is stop with 0Vdc Full Rev and 10Vdc Full FWD

0-5V 0-5Vdc signal

0-5V I 0-5Vdc signal inverted

Range

Vin2 Span I/O 28

Vin2Offset I/O29

I/O: Vin2 Span

28 100.0%

I/O: Vin2 Oset

29 0.0%

LCD Display

Range 0.0 to 200.0% (Default 100.0%)

Description This parameter is used to alter the range of the input being received at terminal Vin2. For example, with a 0

to 10VDC input, setting this parameter to a value of 50% alters the range to 0 to 5VDC.